Phenolic Casters

Phenolic caster wheels are the way to go if you’re looking for a durable, nonmarking caster wheel. These wheels are impregnated with phenolic resin and shaped in tight molds under high pressure. Their anti-marking, chemical-resistant, and economic properties make them an excellent choice for loading heavy loads.

They Have Chemical-Resisting Properties

Phenolic caster wheels have chemical resistance and are often used in material handling applications. They are made of a combination of phenolic resin and macerated denim and are heat and pressure-resistant. These wheels can withstand heavy loads and are relatively quiet compared to steel caster wheels. However, they should not be used in wet environments, as they can break down in these conditions.

Phenolic caster wheels are a good choice for heavy-duty applications, including platform trucks and waste bins. They also resist hard impacts and provide floor protection.

They are Economical

Phenolic Casters Wheels are an economical solution for heavy-duty industrial caster applications. They are a great choice for dumpsters, facility carts, workbenches, mobile louvered panels, and countless other industrial carts. Phenolic wheels are resistant to grease, oil, and most liquids. They are also non-marking and excellent load carriers.

Benzyl Casters Macerated canvas combined with phenolic resin is used to create wheels. High pressure is used to mold them, giving them a smooth surface similar to polished maple floors. They are perfect for dry conditions and have excellent resistance to oil, grease, and gasoline. Additionally, these wheels can withstand high temperatures.

Phenolic Casters Wheels are an economical and durable choice for medium-duty applications. They can support heavy loads up to 1,250 pounds per caster and are made from highly durable materials. They are great for warehouse carts, heavy containers, and toolboxes.

They Leave Black Marks on Floors

Phenolic Casters Wheels are very common and durable but can leave marks on floors. This is because phenolic caster wheels are made of macerated denim and phenolic resin. This mixture creates a durable wheel but is not permanently smooth, making it suitable for dry and rough concrete floors.

The good thing about phenolic caster wheels is that they are relatively inexpensive and can be easily replaced. The downside is that they tend to leave black marks on floors, and they also tend to break very easily. So it’s better to get a different set, such as a glass-filled nylon caster wheel, which is noise and spark-proof, so you don’t have to worry about them leaving black marks on your floors.

They are Non-Marking

Phenolic caster wheels are hard, non-marking, and non-slip. They are made from cotton coated with phenolic resin and offer high capacity and low cost. Phenolic wheels resist impact shocks and do not develop flat spots even when parked. They are also available in a variety of diameters and sizes. They range from one-quarter” to four inches.

Phenolic wheels are an economical alternative to other types of caster wheels. While the initial price tag is higher than some other caster wheels, this initial cost is recouped in reduced replacement costs. Therefore, they are best used in applications where movement is infrequent, and there is no need to worry about floor marking or wheel replacement.

They are Good for Load Carriers

Phenolic Casters are a great option for heavy-duty applications. Made of phenolic resin and cellulose fibers, they are suitable for use indoors and outdoors and are resistant to extreme temperatures. They are also capable of carrying up to 1,200 pounds of weight.

Phenolic Casters Wheels offer good load carrier capacity at a low price. They have rigid bodies, that help them hold up heavy stationary loads. However, you should ensure the wheel’s capacity is sufficient for the load you need to transport. Also, it is important to use phenolic caster wheels only on clean, flat surfaces. Uneven surfaces will cause the tread to wear away, reducing the caster’s capacity.

Phenolic Casters Wheels are popular in many commercial applications. These wheels don’t need lubricants and don’t become gummy over time. However, they are not the best load carriers for heavy-duty applications because they are more prone to damage by moisture. They also tend to collect debris while in use. The best surfaces for phenolic Casters Wheels are solid concrete, cement, or concrete floors.